Paul Agnew Ilektro 1250L, Инструкции пользователя и установка

Страница: 27 / 40

27
REMOVING THE GLASS
USING TWO GLASS LIFTING SUCTION PADS
GRIP THE FRONT GLASS IN THESE LOCATIONS
RELEASING THE GLASS
WARNING: ALTHOUGH THE GLASS PANEL HAS
BEEN TREATED WITH SAFETY EDGES PLEASE
TAKE CARE WHEN HANDLING THE GLASS.
AVOID CONTACT WITH CORNERS AND IF
NECESSARY WEAR PROTECTIVE GLOVES. TWO
PEOPLE MAY BE REQUIRED TO REMOVE THE
GLASS.
•
THE GLASS IS HELD IN POSITION BY
CLAMPS. THE FRONT GLASS HAS 2
CLAMPS. WIDER MODELS HAVE 3
• THE SIDE GLASS DOES NOT NEED TO
BE REMOVED AT ANY TIME UNLESS TO
REPLACE A DAMAGED GLASS WINDOW
• BEGIN BY LOOSENING THE NUTS THAT
HOLD THE CLAMPS.
DO NOT REMOVE THE
NUTS FROM THEIR THREADS.
TAKING GREAT CARE, TAKE THE WEIGHT OF THE
GLASS AND ALLOW THE GLASS TO SLIP OFF
ITS SEAT AS SHOWN IN IMAGE A, AND LOWER
INTO THE CHANNEL IN FRONT OF THE CLAMP
THREADS, POSITION B. NOW LEAN THE GLASS
TOP EDGE OUT OF THE APPLIANCE.
ONCE THE CLAMPS ARE FREE FROM
TENSION WITH THE GLASS, LIFT THE
CLAMPS AWAY FROM THE APPLIANCE AND
SET ASIDE.
SERVICING INSTRUCTIONS
1
5
. REMOVING THE GLASS