Patton SmartNode SN5550 Скачать руководство пользователя | Manualshive

Страница: 32 / 80

background image

Installing the SmartNode device

33

SmartNode 5550 & 4150 Series User Manual

3

• SmartNode Installation

Connecting cables

Connect the cables in the following order:

1.

Connect the ISDN terminals and NT to the BRI ports (see section

“Connecting ISDN terminals and NT

to the SmartNode device’s ISDN BRI ports”

2.

Install the RJ-11 voice port (FXS)/(FXO) cable or cables (see section

“Installing an interface cable on the

SmartNode device’s FXS and FXO interface ports”

3.

Connect the 10/100/1000Base-T Ethernet LAN and WAN (see section

“Connecting the 10/100/

1000Base-T Ethernet LAN and WAN cables”

4.

Connect the power mains cable (see section

“Connecting the power supply”

Installation cable requirements for the WAN interface (SN5550 /2G, /4G, /AVA, /AVB /F Models)

The SmartNode SN5540 series comes with an optional Fiber-SFP, G.SHDSL(EFM-ATM) or VDSL-ADSL
WAN interface. For DSL lines use a straight-through RJ-45 cable to connect the WAN port.

For details on the G.SHDSL port pinout, refer to section

“G.SHDSL EFM & ATM port (/2G and /4G mod-

For details on the VDSL and ADSL port pinout, refer to section

“VDSL-ADSL Port (/A and /AVA & /AVB

models only)”

Installation cable requirements for the SFP for Fiber WAN module (SN5550)

The SmartNode Model SN5550 comes with an option for an SFP for Fiber WAN module. For details about
the tested and compatible SFP modules see

http://www.patton.com/products/sfpmodules.asp

Connecting ISDN terminals and NT to the SmartNode device’s ISDN BRI ports

The SmartNode device comes with two or four ISDN BRI ports located on the rear panel (see

page 34). All ports can be connected to the PSTN (ISDN NT) or terminals

Do not work on the system or connect or disconnect
cables during periods of lightning activity.

The Interconnecting cables shall be acceptable for external
use and shall be rated for the proper application with
respect to voltage, current, anticipated temperature, flam-
mability, and mechanical serviceability.

WARNING

WARNING

«
...
30
31
32
33
34
...
»

Содержание SmartNode SN5550

















































































Отзывы:

Нет отзывов

Похожие инструкции для SmartNode SN5550

Бренд: ICP DAS USA Страницы: 33

Бренд: ADTRAN Страницы: 2

SynapSense 1167

Бренд: Panduit Страницы: 40

Бренд: IntesisBox Страницы: 63

Бренд: Seneca Страницы: 4

ACCESS MANAGER 3.1 SP1 - ADMINISTRATION

Бренд: Novell Страницы: 42

Бренд: Novatel Страницы: 88

SURFboard SBG6400

Бренд: ARRIS/Motorola Страницы: 59

Touchstone TG862

Бренд: Arris Страницы: 2

Touchstone TG3452

Бренд: Arris Страницы: 2

Бренд: ZyXEL Communications Страницы: 56

PowerMaster-360

Бренд: Visonic Страницы: 65

Бренд: ActionTec Страницы: 71

Бренд: Rockwell Automation Страницы: 73

Бренд: SmartRG Страницы: 66

Бренд: Avaya Страницы: 162

Бренд: M-system Страницы: 68

Бренд: Pace Страницы: 32

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды