Patton SmartNode 5540E Series, Руководство пользователя

Страница: 31 / 77

Installing the SmartNode device 31
SmartNode 5540E & 4140E Series User Manual 4 • SmartNode Installation
•
IP addresses and/or URL of SIP servers or Internet telephony services (if used)
• Login and password for PPPoE Access
•
Login and Password for SIP based telephony services
• IP addresses of central TFTP server used for configuration upload and download (optional)
Software tools
The simplest way configuring the SmartNode is through Patton Cloud .
Alternatively you may use the Web interface in combination with a Web wizard to get your unit up and run-
ning. For more details, see the
Wizard Portal .
The Command Line Interface is also supported for configuration, and can be accessed through Telnet /SSH.
Also see the
Knowledgebase for config snippets when configuring your device through CLI.
Power source
Patton recommends that you include an uninterruptible power supply (UPS) in the installation to ensure that
VoIP service is not impaired if the power fails.
Installing the SmartNode device
SmartNode device installation consists of the following:
1.
Placing the device at the desired installation location (see section “Placing the SmartNode device” on
page 31)
2.
Installing interface cables (see section “Connecting cables” on page 32)
3.
Connecting power (see section “Connecting the power supply” on page 34)
When you finish installing the SmartNode device, go to Chapter 5, “Initial Configuration” on page 37.
Placing the SmartNode device
If you will be installing the SmartNode device in an equipment rack, see Appendix G, “Installing Optional
Rack Ears” on page 68.
If you will be installing the SmartNode device on a DIN rail, see Appendix H, “Installing Optional DIN Rail
Mounting Clip” on page 70.
Otherwise, place the SmartNode device on a desktop or similar sturdy, flat surface. Allow sufficient space at the
rear of the chassis for cable connections. Additionally, you should consider the need to access the unit for future
upgrades and maintenance.
To prevent overheating and damaging the unit, proper ventilation is required when
placing the device; leave at least 2 inches (5 cm) to the left, right, front, and rear of
the SmartNode device.
The device should be installed in a dry environment with sufficient space to allow air
circulation for cooling. Do not stack multiple SmartNode devices directly on top of
one another, and do not place items on top of the device. If you will be installing
equipment above the SmartNode device, leave at least 2 inches (5 cm) of clearance
between the devices.
CAUTION