Introduction
45
SmartNode 4970 User Manual
C • Cabling
Introduction
This section provides information on the cables used to connect the SmartNode and the interface cards to the
existing network infrastructure and to third party products.
Console
The SmartNode can be connected to a serial terminal over its serial console port, as depicted in
figure 7
.
Figure 7. Connecting a serial terminal
Note
See section
“Console port”
on page 50 for console port pin-outs.
The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
CAUTION
Serial Terminal
Note
A Patton Model 16F-561 RJ45 to DB-9 adapter is included with
each SmartNode 4970 Series device
RS
-232
Console
ETH
0/1
Reset
0/0
0/1
0/2
0/3
T1/E
1
Содержание SmartNode 4970 Series
Страница 20: ...20 Chapter 2 Applications overview Chapter contents Introduction 21 Application Convert Legacy PBX to VoIP 21...
Страница 44: ...44 Appendix C Cabling Chapter contents Introduction 45 Console 45 Ethernet 46 E1 PRI 47 T1 PRI 48...
Страница 49: ...49 Appendix D Port pin outs Chapter contents Introduction 50 Console port 50 Ethernet 50 PRI port 51...
Страница 52: ...52 Appendix E SmartNode 4970 factory configuration Chapter contents Introduction 53...
