Additional information
30
SmartNode 4970 User Manual
4 • Initial configuration
After the SmartNode has been rebooted the new startup configuration will be activated.
172.16.1.99(if-ip)[WAN]#
reload
Running configuration has been changed.
Do you want to copy the 'running-config' to the 'startup-config'?
Press 'yes' to store, 'no' to drop changes :
no
Press 'yes' to restart, 'no' to cancel :
yes
The system is going down
Additional information
For detailed information about configuring and operating guidance, set up procedures, and troubleshooting,
refer to the
SmartNode Series SmartWare Software Configuration Guide
available online at
www.patton.com/
manuals
.
When you issue the
reload
command, the SmartNode will ask
if you want to copy the running configuration to the startup con-
figuration. Since you just downloaded a configuration file to the
startup configuration you must answer this question with
NO
.
Otherwise, the downloaded configuration will be overwritten
and lost!
IMPORTANT
Содержание SmartNode 4970 Series
Страница 20: ...20 Chapter 2 Applications overview Chapter contents Introduction 21 Application Convert Legacy PBX to VoIP 21...
Страница 44: ...44 Appendix C Cabling Chapter contents Introduction 45 Console 45 Ethernet 46 E1 PRI 47 T1 PRI 48...
Страница 49: ...49 Appendix D Port pin outs Chapter contents Introduction 50 Console port 50 Ethernet 50 PRI port 51...
Страница 52: ...52 Appendix E SmartNode 4970 factory configuration Chapter contents Introduction 53...