SmartNode 4554 Quick Start Guide
3
2.0 Connect the SmartNode to your
local network
You must connect the SN4554 to an IP network that provides a DHCP server. Using the included black Ethernet
cable, connect the SN4554 RJ-45 Ethernet WAN port, labeled
ETH
(see
figure 1
), to an Ethernet hub or switch
on the same network as your PC. The Ethernet WAN interface is configured as a DHCP client.
Figure 1.
Connecting the SN4554 to the network via a hub or switch
The interconnecting cables shall be acceptable for external use and shall be rated for
the proper application with respect to voltage, current, anticipated temperature, flam-
mability, and mechanical serviceability.
CAUTION
Ethernet Hub
or Switch
PC
DHCP
Server
LAN
ISDN 2
ISDN 1
SN4554
ETH
port
