Patton SmartNode 10100 Series, Руководство пользователя

Страница: 36 / 52

Working with Configurations 36
SmartNode 10100 Series User Manual 3 • Initial Setup and Web Management
Restoring a Database Backup
The configuration settings of your system can be restored from a local or remote copy of your database.
1.
Click the
Recover
link, under Database Backup List , to overwrite the current database and restore your
file backups.
Figure 24. Restore Database Backup File
2.
After a few minutes, the Web Portal will come back online and the new configuration will be available.You
need to activate the configuration to apply the changes.
Working with Configurations
This section explains how to manage applications and instances on the SN10100 Web Portal, how to activate a
configuration, and how to configure IP interfaces. Refer to the following sections for specified information:
•
“Managing Applications” on page 36
•
“Activating the Configuration” on page 39
• “Configuring IP Interfaces” on page 43
Note
For more detailed information about working with specific applications and
configurations, refer to the
Smart Media Software Configuration Guide
located online at www.patton.com/manuals/SmartMedia_SCG.pdf .
Managing Applications
This section explains how to start up and verify applications and instances on the Smart Media application
server.
Viewing the List of Installed Applications
The Smart Media application server is designed to run a large variety of applications. Before you can run an
application, you must first be able to view it from a list of applications. To view the selection of applications:
1. Select Instances from the navigation panel.
Figure 25. Applications > Instances