Working with Configurations
39
SmartNode 10100 Series User Manual
3 • Initial Setup and Web Management
Verifying the Application Path
One important indication of the normal operation of an application is when the application path is displayed
in the hardware status window. To verify that the application path is displayed:
1.
Select
Instances
from the navigation panel.
2.
Click the
Status
tab, in the
Application Instances
window, to view the application path.
3.
Verify that the application path is displayed. Verify that the target state is set to
Run
, the current state dis-
plays
Ready
, and the current HA state displays
Active
.
Figure 31. Application Status List
Activating the Configuration
Changes made to the configuration of the Smart Media units are stored on the OAM&P Configuration and
Logging database. In order for changes to be used by the system, they must first be activated. This is done at
the system level and accessed from the navigation panel.
Note
To activate a configuration, you must be the root user or have a user access
level of 0.
1.
Select
Systems
from the navigation panel.
Figure 32. Global > Systems
