Patton SmartNode 10100 Series, Руководство пользователя

Страница: 27 / 52

Overview 27
SmartNode 10100 Series User Manual 3 • Initial Setup and Web Management
Overview
This chapter explains how to connect the SmartNode 10100 to the network, and how to access and manage the
SmartNode Web Interface. Refer to the following sections for more details on:
• “Accessing the SN10100” on page 27
•
“Accessing and Navigating the Web Interface” on page 30
•
“Managing Users” on page 32
•
“Managing the Database Backup” on page 34
• “Working with Configurations” on page 36
Note
For more detailed information about working with specific applications and
configurations, refer to the
Smart Media Software Configuration Guide
located online at www.patton.com/manuals/SmartMedia_SCG.pdf .
Accessing the SN10100
You may access the SmartNode through the console management port, or through the Ethernet management
port. Refer to the following sections for more information:
•
“Accessing the SmartNode via the Console Management Port” on page 27
• “Accessing the SmartNode via the Ethernet Management Port” on page 29
Accessing the SmartNode via the Console Management Port
Logging into the SmartNode Console
1.
To physically connect the console serial port, follow the instructions in “Connecting to the Console Serial
Port” on page 20.
2.
To communicate with the SN10100 through the console port, you must first configure a terminal emula-
tor or console application (such as HyperTerminal or Putty) in order to configure initial settings. Config-
ure the terminal emulator with the following settings:
3.
Login to the console using the specific credentials included on the 'Important Notice' that shipped with
your unit. (If you do not have the “Important Notice” sheet, contact
support@patton.com ). The factory
default configuration for the Ethernet Interface IP address is 192.168.200.10/24 .
Baud rate Data rate Parity Stop bits Flow control
9600 8 bits None 1 None