Patton FiberPlex 1008E, Руководство пользователя

Страница: 23 / 44

DIN-Rail Mounting 23
FiberPlex 1008E User Manual 3 • Mounting Installation
DIN-Rail Mounting
The DIN-Rail is pre-installed on the industrial Ethernet switch from the factory. If the DIN-Rail is not on the
industrial Ethernet switch, see
figure 16 to learn how to install the DIN-Rail on the switch.
Figure 16. The Rear Side of the Switch and DIN-Rail Bracket
Do the following to learn how to hang the industrial Ethernet switch:
1. Use the screws to install the DIN-Rail bracket on the rear side of the industrial Ethernet switch.
2.
To remove the DIN-Rail bracket, do the opposite from step 1.
3.
After the DIN-Rail bracket is installed on the rear side of the switch, insert the top of the DIN-Rail on to
the track as shown in
figure 17 on page 24
.