Introduction
28
CopperLink CL1211E/CL1212E User Manual
3
• Configuration
Introduction
The CL1200E has eight DIP switches (S1) for configuring the unit for a wide variety of applications. This sec-
tion describes switch locations and explains the different configurations.
Accessing DIP Switch S1
1.
Using a small flat-tip screwdriver, remove the protective cover located on the right side panel of the
CL1200E (see
).
Figure 15. Removing protective cover
2.
The DIP switches are externally accessible from the side of the CL1200E.
on page 29 shows the
orientation of the DIP switches in the On and Off positions.
