Connecting Power
26
CopperLink CL1211E/CL1212E User Manual
2
• Installation
Connecting Power
The CL1212E does not have a power switch, so it powers up as soon as it is plugged in.
An external AC or DC power supply is available separately. This connection is made via the barrel jack on the
rear panel of the CL1212E. No configuration is necessary for the power supply.
DC power (supplied via the power supply jack to the CL1212) must meet the following requirements; DC
power supplied must be regulated 5 VDC ±5%, 1.0A minimum. Center pin is +5 V. The barrel type plug has
2.5/5.5/10mm I.D./O.D./Shaft Length dimensions.
The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
This device is not intended for use with power supplies that pro-
vide high instantaneous current (for example: lead acid batter-
ies).
CAUTION
CAUTION
