2
SNOGA Quick Start Guide
• Do not open the device when the power cord is con-
nected. For systems without a power switch and with-
out an external power adapter, line voltages are
present within the device when the power cord is con-
nected.
• For devices with an external power adapter, the power
adapter shall be a listed
Limited Power Source
The
mains outlet that is utilized to power the device shall
be within 10 feet (3 meters) of the device, shall be eas-
ily accessible, and protected by a circuit breaker in
compliance with local regulatory requirements.
• For AC powered devices, ensure that the power cable
used meets all applicable standards for the country in
which it is to be installed.
• For AC powered devices which have 3 conductor power
plugs (L1, L2 & GND or Hot, Neutral & Safety/Protec-
tive Ground), the wall outlet (or socket) must have an
earth ground.
• For DC powered devices, ensure that the interconnect-
ing cables are rated for proper voltage, current, antici-
pated temperature, flammability, and mechanical
serviceability.
• WAN, LAN & PSTN ports (connections) may have haz-
ardous voltages present regardless of whether the
device is powered ON or OFF. PSTN relates to inter-
faces such as telephone lines, FXS, FXO, DSL, xDSL,
T1, E1, ISDN, Voice, etc. These are known as “hazard-
ous network voltages” and to avoid electric shock use
caution when working near these ports. When discon-
necting cables for these ports, detach the far end con-
nection first.
• Do not work on the device or connect or disconnect
cables during periods of lightning activity.
In accordance with the requirements of council directive
2002/96/EC on Waste of Electrical and Electronic Equip-
ment (WEEE), ensure that at end-of-life you separate this
product from other waste and scrap and deliver to the
WEEE collection system in your country for recycling.
WARNING
