Patton electronics POTS/ISDN Splitter Shelf 6010 Series, Руководство пользователя

Страница: 9 / 12

9
5.0 CABLING OVERVIEW
The Model 6010 Splitter Shelf cabling configurations will vary depending
on installation locations and the number of lines supported by the
DSLAM. However, the physical interface to the Front Panel connectors
are standard 50-pin RJ-21 type receptacle connectors. Each Splitter
card uses 24 pairs of the 25 pairs available on each 50-pin connector.
6.0 CONNECTOR PINOUTS
• DSL signals to and from the DSLAM enter the 6010 splitter shelf using
the left most telephone connectors, designated ‘
DSL ’ interface.
• Signals to and from the LINE (outside plant) enter the 6010 splitter shelf
using the centertelephone connectors, designated ‘
LINE ’ interface.
• Cables to and from the central office switch enter the 6010 splitter shelf
via the right hand telephone connectors, designated ‘
PSTN ’ interface.
Note See Table 2 on page 10 for connector pinouts.
The interconnecting cables shall be acceptable for external use and shall be rated for
the proper application with respect to voltage, current, anticipated temperature, flam-
mability, and mechanical serviceability.
CAUTION