![background image](http://html1.mh-extra.com/html/patton-electronics/patton-iplink-2603/patton-iplink-2603_getting-started-manual_4094964075.webp)
Security Triggers
75
Models 2603, 2621, and 2635 Getting Started Guide
7 • Security
This example continues to allow pings over the firewall:
1.
From the Configuration Menu, > Configuration > Security >
Security Policy Configuration...
>
Port Filters...
>
Add Raw IP Filter
2.
Enter
1
(for ICMP) in the Protocol Number field.
3.
Set both
Inbound
and
Outbound
for
Allow
. (See
figure 50
.)
4.
Click on Create.
Figure 50. Defining ICMP port filter for ping
You can now ping between the two networks
Security Triggers
Security triggers are used to allow an application to open a secondary port in order to transport data. The most
common example is FTP. This procedure sets up a trigger on the Firewall to permit an FTP session from PC A
to PC B, but not the reverse.
1.
First, create an outbound-only portfilter for FTP and add it to the item0 policy.
2.
Following the path given in step 1 for the ping portfilter in the previous section, click on
Add TCP Filter
.
3.
The Port Range is entered as
21
for both Start and End.
6
TCP
8
EGP
9
IGP
17
UDP
46
RSVP
47
GRE
89
OSPFIGP
92
MTP
94
IPIP
Protocol
Number
Abbreviation
Содержание Patton IPLink 2603
Страница 9: ...Contents Models 2603 2621 and 2635 Getting Started Guide 9 ...
Страница 24: ...24 Chapter 2 Product Overview Chapter contents Introduction 25 Applications Overview 26 ...
Страница 40: ...40 Chapter 4 Ethernet LAN Port Chapter contents Introduction 41 LAN Connections 41 Ethernet Port 41 ...
Страница 122: ...122 Appendix C Cable Recommendations Chapter contents Ethernet Cable 123 Adapter 123 ...