21
6.0 OPERATION
When the Model 1082/I and Model 1082/144/I have been properly config-
ured and installed, it should operate transparently. This sections describes
power-up, LED status monitors, and the built-in loopback test modes.
6.1 POWER-UP
Before applying power to the Model 1082/I or Model 1082/144/I, please
read section 5.4, “Power Connection” on page 19 and ensure that the
unit is connected to the appropriate power source.
6.2 LED STATUS MONITORS
The Model 1082/I and Model 1082/144/I feature six front panel LEDs that
monitor connections on the DSL and 10Base-T links, signaling, error and
test modes. (See Figure 11 for front panel location of each LED).
Descriptions of each LED follow in Table 1 on page 22.
Figure 11.
Model 1082/I or 1082/144/I front panel LED locations
DSL
NetLink
™ 10Base-T iDSL Model
10BT
NS
ER
TM
Link
511E/RDL
Normal
511/RDL
DSL
NS
10BT
TM
ER
Loopback
switch
