6
NanoServ Setup Guide
Copyright © 2006, Patton Electronics Company. All rights reserved.
The information in this document is subject to change without notice. Patton Electronics assumes no
liability for errors that may appear in this document.
•
To prevent shock or fire hazard, do not expose your
NanoServ™ to rain or moisture.
•
Never install your NanoServ™ in wet locations.
•
To avoid electrical shock, do not open the case. Contact the fac-
tory offices for qualified personnel servicing.
•
Never touch un-insulated terminals or wire unless your power
adaptor and display monitor are disconnected.
•
When using the system, avoid using or installing the modem to
the serial port during a storm or lightning.
•
Do not use the modem or a telephone to report a gas leak in the
vicinity of the leak.
•
USB cables are not supplied.
WARNING
