manualshive.com logo in svg

Patton electronics Model 2604, Справочное руководство администратора, Страница: 66 / 148

Поделиться
Скачать
Patton electronics Model 2604 Скачать руководство пользователя страница 66

10 • IP

T1/E1 DACS Administrators’ Reference Guide

64

Modify

# Fragmented OK (ipFragOKs)

The number of IP datagrams that have been successfully fragmented at this entity.

# Fragmented Failed (ipFragFails)

The number of IP datagrams that have been discarded because they required fragmenting at this entity, but 
were not fragmented because their 

Don’t Fragment

 option was set.

# Fragments Created (ipFragCreates)

The number of IP datagram fragments that have been generated at this entity.

# Valid but Discarded (ipRoutingDiscards)

The number of routing entries which were chosen to be discarded even though they are valid. One possible 
reason for discarding such an entry could be to make more buffer space available for other routing entries.

Modify

The Modify IP configuration window (see figure 21) is where you can change IP Forwarding and Default 
Time-to-Live parameters.

Figure 21. IP configurations modification window

Forwarding (ipForwarding)

Determines whether this entity is acting as an IP gateway that will forward datagrams received by—but not 
addressed to—this entity. IP gateways forward datagrams, IP hosts do not (except those source-routed via the 
host).

Note

For some managed nodes, this object may take on only a subset of the 
values possible. Accordingly, it is appropriate for an agent to return a 
"badValue" response if a management station attempts to change this 
object to an inappropriate value.

The following options are available:

•

forwarding(1)—acting as a gateway

•

not-forwarding(2)—

not

 acting as a gateway

Default Time-To-Live (ipDefaultTTL)

The default value inserted into the 

Time-To-Live 

(TTL) field in the IP header of datagrams originating from this 

entity, whenever a TTL value is not already supplied by the transport layer protocol.

Содержание Model 2604





















































































































































Отзывы:

Нет отзывов