Patton electronics Model 2604 Скачать руководство пользователя страница 146 | Manualshive

Страница: 146 / 148

Patton electronics Model 2604 Скачать руководство пользователя страница 146

20 • License

T1/E1 DACS Administrators’ Reference Guide

144

Introduction

Introduction

The

License

link presents the End User License Agreement for the DACS software. Click on

License

under the

Configuration Menu

to display the

License

main window (see figure 54).

Figure 54. License window

By opening the DACS, operating the Designated Equipment or downloading the Program(s) electronically,
the End User agrees to the conditions in the “End User License Agreement” below.

End User License Agreement

By opening this package, operating the Designated Equipment or downloading the Program(s) electronically,
the End User agrees to the following conditions:

1. Definitions:

A) “Effective Date” shall mean the earliest date of purchase or download of a product containing the Patton
Electronics Company Program(s) or the Program(s) themselves.

B) “Program(s)” shall mean all software, software documentation, source code, object code, or executable code.

C) “End User” shall mean the person or organization which has valid title to the Designated Equipment.

D) “Designated Equipment” shall mean the hardware on which the Program(s) have been designed and pro-
vided to operate by

«
...
144
145
146
147
148
»

Содержание Model 2604





















































































































































Отзывы:

Нет отзывов