Patton electronics ipRocketLink 3088FR, Быстрый старт, Страница: 2 / 10

2 ipRocketLink 3088FR Quick Start Guide
1.0 Power up the NTU
Your NTU comes with one of the following power supply options:
•
Internal AC power supply with detachable power cord
•
External AC adaptor with detachable power cord
•
Internal DC power supply—no power accessories are included
1.1 Models with internal AC power supply
1. Insert the female end of the AC power cord into the internal power supply connector.
2. Connect the male end of the power cord into an AC power outlet (100–240 VAC).
1.2 Models with external AC adaptor
1. Connect female plug of the AC power cord to the AC adaptor provided.
2. Connect the barrel-type connector of the AC adaptor to the barrel-type power jack on the ipRocketLink.
3. Insert the male plug of the AC power cord into an AC power outlet (100–240 VAC)
.
• The ipRocketLink 3088FR contains no user serviceable parts. The
equipment shall be returned to Patton Electronics for repairs, or
repaired by qualified service personnel.
• An approved external power supply that incorporates a disconnect
device shall be used and positioned within easy reach of the operator.
• For AC powered units, the power cable used to connect the power
supply shall meet all applicable standards for the country in which it
is to be installed, and be connected to a wall outlet which has
earth ground.
• Hazardous network voltages are present in WAN ports regardless of
whether power to the unit is ON or OFF. To avoid electric shock, use
caution when near WAN ports. When detaching the cables, detach the
end away from the 3088FR first.
• Do not work on the system or connect or disconnect cables during
periods of lightning activity.
The interconnecting cables shall be acceptable for external use and shall be rated for
the proper application with respect to voltage, current, anticipated temperature, flam-
mability, and mechanical serviceability.
WARNING
CAUTION