Patton electronics DIAMONDLINK 3201, Руководство пользователя

Страница: 40 / 128

4 • Basic Application Configurations Model 3201 G.SHDSL Integrated Access Device User Guide
38 DSLAM Connections with remote CPE units
– Cost:1
– Interface:[blank]
5. Go to
G.SHDSL
in the Configuration Menu, then the submenu
Status
. The Modem State should be “deacti-
vated.” (If not, go to the Action and change it to deactivate.)
Then in the Action submenu under G.SHDSL, change Action to Start, then click on
Action
.
DSLAM Connections with remote CPE units
Bridged application configurations to a DSLAM
Three bridged services are offered, RFC 1483 Bridged, PPPoA Bridged, and HDLC Bridged.
The configurations show a desktop on one end and a laptop on the other. The laptop and its Model 3201
would be replaced with a DSLAM.
RFC 1483 Bridged Configuration.
No additional IP addresses are needed other than the IP address chosen earlier. In fact, if you are configuring and
managing the model 3201 only from the CLI (Command Line Interface), an IP address is not needed at all. The
limitation of no IP address precludes the user from doing web management of the 3201 since management is
done via the Ethernet port.
As in the PPPoA Bridged application, both sides of the RFC 183 bridged connection are on the same subnet.