![background image](http://html1.mh-extra.com/html/patton-electronics/diamond-edge-3224/diamond-edge-3224_installation-manual_4068335042.webp)
5 • Maintenance
Model 3224 G.SHDSL IpDSLAM Installation Guide
42
Introduction
Introduction
This chapter describes replacing a Model 3224 power supply. If you require more help, refer to chapter 6,
“Contacting Patton for assistance”
on page 45.
Replacing a power supply
Model 3224 IpDSLAM power supplies are hot-swappable, so a defective supply can be replaced without deac-
tivating the IpDSLAM. Do the following to replace a malfunctioning power supply:
Note
You will need a flat-tip screwdriver to perform the following
procedure.
Figure 19. Captive fasteners and power cable retainer clip locations
1.
At the malfunctioning power supply, rotate the power cable retaining clip (see
figure 19
) so it is no longer
attached to the power cord.
2.
Disconnect the power cable plug from the malfunctioning power supply.
Содержание Diamond Edge 3224
