3 • Configuring the DACS for operation
Model 3095 mDSL DACS Getting Started Guide
34
Initial Configuration through the RS-232 Control Port
Figure 13. Connect To window
3. On the Connect To window (see figure 13), set Connect using: to one of the options named Direct to ComX
(where the "X" refers to the number identifying the RS-232 serial port on the PC). In the following proce-
dure, Com1 will be the used as the port identifier.
4. Click on
OK
.
5. The COM1 Properties window displays.
6. Configure your COM port settings as shown in figure 14, then click
OK
.
Figure 14. COM1 Properties window
7. Click on the
File
menu, then select
Properties
.
Содержание 3095
