Patton electronics 2977 Family Скачать руководство пользователя

Страница: 45 / 66

Driver installation for the Windows 2000 operating system

Model 2977 DialFire RAS User Guide

4 • Driver installation and configuration

Configuring Outgoing Dial-up Networking Connections

Use this procedure to configure outgoing Dial-up Networking connections from your server to other systems.
You should have already installed the Patton adapter and device driver.

Procedure

1. From the

Start

menu, choose

Settings > Network and Dial-up Connections

2. Choose

Make New Connection

to start the Network Connection Wizard.

3. Choose

Dial-up to private network

and complete the wizard.

4. Upon completion of the wizard, choose Properties if you wish to configure dialing rules (such as what

number to dial to get an outside line) or to add alternate phone numbers to try if the primary number is
busy.

Changing Adapter Properties

Use this procedure to change the configuration of an installed adapter.

Procedure

1. From the

Start

menu, choose

Settings > Control Panel > System > Hardware > Device Manager

2. From the displayed list, choose DialFire RAS as your network adapter.

3. Choose the Patton adapter you wish to configure.

4. From the Action menu, choose

Properties > Advanced

5. Configure the adapter as necessary.

6. If you changed the hardware resources from the default settings, Windows may notify you to restart the

system to complete the configuration.

If you left the hardware resources at their default values, the adapter is ready to use without restarting the
system.

Changing Phone and Modem Options

Use this procedure once you have installed and configured the driver and now want to change the configura-
tion.

Phone and modem options that can be set with this procedure include:

•

Maximum Port Speed

•

Speaker Volume

•

Dial Control

•

Wait for tone before dialing

•

Extra Initialization Commands

Procedure

1. From the

Start

menu, choose

Settings > Control Panel > Phone and Modem Options > Modems

2. Choose a Patton modem device to configure.

Содержание 2977 Family



































































Результаты поиска

Содержание 2977 Family

Отзывы:

Похожие инструкции для 2977 Family

Бренды по названию

Популярные бренды

Patton electronics 2977 Family, Руководство пользователя

Результаты поиска

Содержание 2977 Family

Отзывы:

Похожие инструкции для 2977 Family

Бренды по названию

Популярные бренды