PATTON MODEL 2013 SPECIFICATIONS
Transmission Format: Asynchronous, full or half duplex
Interface Standards: Unisys TDI, CCITT V.28.EIA/RS-232D
RS-232 Connection:
DB-25 female, configured as DCE
RS-232 (DTE) Pins
Required:
2, 3, 4, 5, 6, 8 and 20
TDI Connection:
DB-25 male; TD/RD on pin 2, signal ground
on pin 7, chassis ground on pin 1 (where
needed)
Maximum RS-232
Distance:
100’ over three twisted pairs
Maximum TDI
Distance:
1000’ over one twisted pair
Maximum Terminals
Supported:
One RS-232 (DTE) terminal, 10 TDI
terminals
LED Indicators:
RD on each side
Data Rates:
Transparent to data rate
Power Supply:
No AC power or batteries required; DC
voltage of >/= 6.2 V (unloaded) or >/= 6.8 V
(loaded) supplied to device via RS-232
(DTE) pin 20
Dimensions:
2.20”L x 1.75”W x 0.75”H
© Copyright
Patton Electronics Company
All Rights Reserved
3