2.3 1092A SNMP MANAGEMENT SOLUTIONS
Model 1092A is
SNMP manageable
when it is connected to a
rack-mounted Model 1092ARC . SNMP management is enabled
through a 1001MC rack management card located in the Patton
Electronics Rack System.
2.3.1 HTTP/HTML Management
The 1001MC maintains HTML pages that can be viewed through a
web browser. You can display remote statistics and configure Model
1092A parameters simply by entering the 1001MC’s IP address into the
browser
Mgt
Station
10Base-T
Connection
to 1001MC
2B1Q
Connections to
Remote 1092As
Rack-Mounted
1092ARCs
Figure 1.
Typical Application of the 1092A
5
3.0 CONFIGURATION
The Model 1092A is equipped with two sets of eight DIP switches,
which allow configuration of the unit to a wide variety of applications.
This section describes switch locations and explains all possible
configurations.
3.1 CONFIGURING THE HARDWARE DIP SWITCHES
The Model 1092A uses a unique set of 16 external mini DIP
switches that allow configuration to a wide range of applications. The
16 external switches are grouped into two eight-switch sets, and are
externally accessible from the underside of the Model 1092A (See
Figure 2).
The two sets of DIP switches on the underside of the Model 1092A
will be referred to as S1 and S2. As Figure 3 shows the orientation of
all DIP switches is the same with respect to “ON” and “OFF” positions.
Figure 3.
Close Up of Configuration Switches (both sets are identical in appearance)
Figure 2.
Underside of Model 1092A, Showing Location of DIP Switches
Front
Back
S2
S1
ON
OFF
ON
OFF
6