EN
99
used for appropriate conditions will
reduce personal injuries.
c)
Prevent unintentional starting.
Ensure the switch is in the off-
position before connecting to
power source, picking up or car-
rying the tool.
Carrying power tools
with your finger on the switch or
energising power tools that have the
switch on invites accidents.
d)
Remove any adjusting key or
wrench before turning the power
tool on.
A wrench or a key left at-
tached to a rotating part of the pow-
er tool may result in personal injury.
e)
Do not overreach. Keep proper
footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
f)
Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away
from moving parts.
Loose clothes,
jewellery or long hair can be caught
in moving parts.
4 POWER TOOL USE AND CARE
a)
Do not force the power tool. Use
the correct power tool for your
application.
The correct power tool
will do the job better and safer at the
rate for which it was designed.
b)
Do not use the power tool if the
switch does not turn it on and off.
Any power tool that cannot be con-
trolled with the switch is dangerous
and must be repaired.
c)
Disconnect the plug from the
power source before making any
adjustments, changing accesso-
ries, or storing power tools.
Such
preventive safety measures reduce
the risk of starting the power tool
accidentally.
d)
Store idle power tools out of the
reach of children and do not al-
low persons unfamiliar with the
power tool or these instructions
to operate the power tool.
Power
tools are dangerous in the hands of
untrained users.
e)
Maintain power tools. Check for
misalignment or binding of mov-
ing parts, breakage of parts and
any other condition that may af-
fect the power tool’s operation. If
damaged, have the power tool re-
paired before use.
Many accidents
are caused by poorly maintained
power tools.
f)
Use the power tool and acces-
sories in accordance with these
instructions, taking into account
the working conditions and the
work to be performed.
Use of the
power tool for operations different
from those intended could result in
a hazardous situation.
5 SERVICE
a)
Have your power tool serviced by
a qualified repair person using
only identical replacement parts.
This will ensure that the safety of
the power tool is maintained.
Содержание PE-250 SHZ
