EN
88
EN
89
MOUNTING THE CRANK
Mount the crank
8
to the hand winch
and fix it with the nut.
1
Tighten the nut with a spanner.
2
3
CHANGING THE GEARWHEELS
Fix the crank
8
to the axis bolt of the
small gearwheel
6
:
Less strength required - more rotations
needed.
Fix the crank
8
to the axis bolt of the
big gearwheel
7
:
More strength required - less rotations
needed.
RELEASE AND REWIND
Secure the load at the chosen location.
Afterwards release the steel cable
2
a
little to remove the load hook
5
.
Warning!
lt is possible for the load
to be re leased abruptly!
3
To rewind, hold the steel cable at the
load hook and rewind neatly. Ensure
also here that the ratchtet switch is
engaged.
4
FIXING A LOAD
Unwind the steel cable
2
by rotating the
crank
8
counterclockwise. For this, use
the help of a second person.
Warning!
Only pull loads horizon-
tally.
1
Altach the Ioad hook
5
securely to the
Ioad you intend to pull. Check that the
snap lock
4
is closed.
Warning!
Never fully unwind the
steel cable under load.
2
RATCHET SWITCH
Unwind: The ratchet switch
3
must be
fully engaged in the shown position.
Unwind by rotating the crank
8
clock-
wise.
Warning!
Don´t touch the steel ca-
ble without protective gloves!
1
Rewind: The ratchet switch
3
must be
fully engaged in the shown position.
Rewind by rotating the crank
8
coun-
terclockwise.
Warning!
Never operate the product
without engaged ratchet switch!
2
4
1
2
1
3
2
4
1
2
