EN
87
fIt nut ADAptor
Pull the chuck
1
out as far as it will go.
1
Once the battery
4
is fully charged, pull
it out of the battery base
10
.
2
AttAch BAttery
Slide the battery
4
into the impact.
driver
1
Fit the nut adaptor (not included) into
the chuck
1
and release it.
2
To release the battery
4
, press the bat-
tery release buttons
7
and pull it out of
the impact wrench.
2
fIt nut
Fit a corresponding nut (not included)
on to the adaptor.
1
rotAtIon DIrectIon
To drive in screws or nuts, set the rota-
tion direction switch
5
to
.
1
To loosen screws or nuts, set the rota-
tion direction switch
5
to
.
2
caution!
If the impact wrench is not
in use, centre the rotation direction
switch, in order to lock the tool.
caution!
Only use the provided bat-
tery with the impact wrench.
chArge BAttery
Slide the battery
4
into the battery base
10
of the charging station
8
and check
its LED lights
9
:
1
caution!
Before fitting nuts or
adaptors, centre the rotation direc-
tion switch, in order to lock the tool.
red
Operating
red, green flashes
During charging
red flashes
Fully charged
