Pattfield Ergo Tools E-PST 800 L, Руководство по эксплуатации, Страница: 11 / 60

11
GB

Important!
When using the equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual / safety
instructions with due care. Keep this manual in a safe
place, so that the information is available at all times.
If you give the equipment to any other person, hand
over these operating instructions / safety instructions
as well. We cannot accept any liability for damage or
accidents which arise due to a failure to follow these
instructions and the safety instructions.
1. Safety regulations
The corresponding safety information can be
found in the enclosed booklet.
Important! Laser radiation
Do not look into the beam
Laser class 2
Protect yourself and your environment from accidents
by taking the appropriate precautionary measures.
앬 Do not look directly into the laser beam with the
naked eye.
앬
Never look directly into the laser path.
앬
Never direct the laser beam at reflecting surfaces
or persons or animals. Even a low output laser
beam can inflict injury on the eye.
앬 Caution: It is vital to follow the work procedures
described in these instructions. Using the tool in
any other way may result in hazardous exposure
to laser radiation.
앬 Never open the laser module.
2. Description (Figure 1)
1. On/Off switch for laser
2. Knurled screw for speed control
3. Locking button
4. ON/OFF switch
5. Allen key
6. Power cable
7. Adapter for chip extraction
8. Holder for saw blades
9. Adjustable
soleplate
10. Graduated scale for soleplate
11. Selector switch for pendulum action
12. Guide roller
13. Saw blade
14. Parallel stop
15. Locking screws for parallel stop
16. Safety guard
17. Saw blade holder
18. Laser
19. Screws for soleplate
3. Proper use
The jigsaw is designed for sawing wood, iron, non-
ferrous metals and plastics using the appropriate saw
blades.
The machine is to be used only for its prescribed pur-
pose. Any other use is deemed to be a case of mis-
use. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
4. TECHNICAL DATA
Nominal voltage: 230 V ~ 50 Hz
Power consumption: 710 W
Cutting rate: 500-3000 strokes/min
Stroke height: 20 mm
Cutting depth in wood: 80 mm
Cutting depth in plastic: 25 mm
Cutting depth in iron: 10 mm
Mitre cuts: up to 45° (left and right)
Sound pressure level L
pA
: 90,3 dB
Sound power level L
WA
: 101,3 dB
Vibration a
hv
8,865 m/s 2
Double isolation II /
쓑
Ꮩ
Anleitung E-PST 800 L_SPK7:_ 23.07.2007 8:22 Uhr Seite 11