EN
148
1
2
2
1
2
2
1
1.
2.
1
1
2
FIT BIT
Open the chuck ring
1
until the bit fits
into the chuck.
Caution!
Before changing bits, cen-
tre the rotation direction switch, in
order to lock the tool.
1
To release the battery, press the bat-
tery release switch
6
and slide off the
battery.
2
Fit the bit into the chuck
2
and tighten
the chuck ring
1
securely. Set the de-
sired torque at the torque ring
10
.
Remove the bit by opening the chuck
ring
1
.
2
FIT DRILL
Open the chuck ring
1
until the drill
fits into the chuck and set the torque
ring
10
to drill .
Caution!
Before changing drills,
centre the rotation direction switch,
in order to lock the tool.
1
Fit the drill into the chuck
2
and tighten
the chuck ring
1
securely.
Remove the drill by opening the chuck
ring
1
.
2
ATTACH BATTERY
Slide the battery
7
onto the tool until it
clicks into place.
Caution!
Only use the tool with the
batteries specified in technical data.
1
ROTATION DIRECTION
To drive in screws or drill, set the rota-
tion direction switch
9
to
.
Caution!
Wait until the chuck has
stopped rotating before changing
the rotation direction.
1
To loosen screws, set the rotation di-
rection switch
9
to
.
2
Adjustments
ROTATION SPEED
Set the desired rotation speed on the
gear selector
11
.
1
st
gear:
Screw driving /
Larger diameter drilling
1
2
nd
gear:
Smaller diameter drilling
2