7. Locate the arm hoop. Loosen the black screw knobs (counter
clockwise) on the white tube clamps so that the clamp can be
opened completely. This will allow the arm hoop to be positioned in
between the vertical uprights and fastened to the vertical
uprights. To put the arm hoop in place between the vertical
uprights, tilt the arm hoop about 45º to the base and position one
tube clamp on one of the vertical uprights.(Fig.3) Gently bring the
arm hoop parallel to the base, allowing the other tube clamp to
position itself on the other vertical upright. Close the white tube
clamps and tighten the knobs to securely fasten the arm hoop to
the vertical uprights. (Fig.4)
8. Place the tray on the
armpads in the desired
position. Rotate the
handle on the attaching
brackets into the locked
position.(Fig.5) The circular
lip around the handle
tightens up against the
underside of the armpad
to keep the tray in place.
Fig.4
Fig.5
Fig.3
rev03/05
PAGE 2 OF 2 - 08706
USER’S
FRONT
