page 24
RITRON MODEL:
SERIAL NUMBER:
CHAN
0
1
2
3
4
5
6
7
8
9
A
b
c
d
E
F
RECEIVE (RX)
FREQUENCY
TRANSMIT (TX)
FREQUENCY
QC
CODE
RX/TX
PQC
CODE
RX/TX
DQC
CODE
RX/TX
SCAN LIST (Add a "P" for Priority, "N" for Normal)
-OR- SPECIAL FEATURES
The RITRON RPM mobile is a programmable, track-tuned two-way radio that
can transmit and receive on any one of up to 16 channels in a professional FM
communications band (UHF or VHF available). This radio features channel select
and monitor push-buttons, and a single digit display. Each channel can be "dealer
or factory" programmed to contain a unique set of operating frequencies and
options. These options include communications industry standard signaling
formats: Quiet Call, Digital Quiet Call and Paging Quiet Call.
INSPECTION
Make sure the radio package includes a RITRON mobile transceiver and two
boxes. One box contains the microphone and attached cord. The ther box holds
radio and microphone brackets, a DC power cable, an in-line fuse assembly and
installation hardware. See the installation instructions in the hardware box for a
complete list of parts included. Examine the equipment immediately after delivery
and report any damages to the shipping company.
MODEL IDENTIFICATION
RPM-150 AND RPM-450
A label attached to the back of the mobile includes the FCC identification and radio
serial numbers. The radio model is the last six characters of the FCC ID number.
For example, look at the label below. The model number is RPM-450. This means
that the radio is designed to operate in the UHF FM band, on frequencies from
450 to 470 MHz. A FCC label that says "RPM-150" identifies the radio as VHF,
for use on frequencies from 150 to 165 MHz. (Models that operate in other sub-
bands within the UHF and VHF bands are available.)
INTRODUCTION
page 1
FIG-1: RPM-450 FCC LABEL
Model No.
27500
www.TwoWayRadioEquipment.com | (800) 878-7829 | [email protected]
