background image

TO AVOID SERIOUS PERSONAL INJURY AND PROPERTY DAMAGE: 

For your safety, do not store or use gasoline or other flammable vapors or liquids in 

the vicinity of this or any other appliances. Keep the area free and clear of 

combustible. (See ANSI Z83. 14B, 1991).   

Improper installation, adjustment, alteration, service or maintenance of this 

equipment can cause property damage, personal injury, or death and voids warranty. 

Read the installation operating and maintenance instructions thoroughly before 

installing, or operating this equipment.   

Instructions must be posted in a prominent location. All safety precautions must be 

taken in the event the user smells gas. If you smell gas, immediately shut off the 

main gas valve, extinguish all heat and flames, and call 911. Safety information can 

be obtained from your 

local gas supplier.   

IMPORTANT SAFEGUARDS & SAFETY INSTRUCTIONS 

When using gas cooking equipment, basic safety precautions should always be 

followed, including the following:   

The Griddle outside surfaces may become HOT after use. Use caution when touching the unit. 

· 

Never directly touch the burners or cooking grates while the Griddle is on.   

· 

Always turn off the unit when not in use, servicing or adjusting any parts or attachments, and before 

cleaning.   

· 

Never leave the Griddle on overnight. 

· 

Do not operate any equipment with a damaged or leaking gas line, ignitor or valves or if the unit is dropped 

or damaged in any manner.    Call for service.   

· 

The use of attachments not recommended or sold by the manufacturer may cause fire, injury or even death. 

· 

Do not use outdoors.   

· 

Do not use this equipment for any use other than the use intended by the manufacturer.   

· 

Never use the Griddle as a heating source   

· 

The Griddle does not contain any user-serviceable parts. Dealers or recommended qualified technicians 

should carry out repairs. Do not remove any components or service 

panels on this product.   

· 

Never bypass, alter, modify or attach any unauthorized parts to this equipment. Doing so may create 

hazards and will void warranty   

· 

Vender takes every care to ensure that all products are safe. Steel cutting procedures used to manufacture 

these items result in sharp edges. These sharp edges are removed to the best of our ability; however, we 

insist the operator take care when in contact with this piece of equipment.   

· 

Always keep hands, hair and clothing away from heating source.   

· 

Allow the Griddle to cool down after use and before dismantling for cleaning; the unit will be too hot to handle 

immediately after use. 

Содержание PT-G24-M

















Отзывы: