BURNERS
•
Turn on the gas supply and ignite the pilot flame with a lighter. If the unit hasn’t been used in a while or if this is the first lighting,
ignition might take a little longer (about two or three minutes).
•
Press the corresponding valve knob of burner and turn 90 degrees counterclockwise. The burner will be ignited, and the flame
will be at Max. To set the flame to Min, rotate counterclockwise another 90 degrees.
•
When finished turn off main burner by rotating the knob clockwise to off position. Pilot should remain lit.
•
For complete shutdown, ensure that all burner knobs are turned to the off position, and then turn main gas supply off.
CONVECTION OVEN
Wiring diagram
HL1------------Power indicator
HL2-------------Motor indicator
HL3------------Ignition indicator
S1---------------Power on/off switch
S2--------------COOK/COOL switch
S3---------------Micro switch
S4--------------Gas ignition switch
IC1--------------Digital thermostat
IC2-------------Ignition module
YV-----------------Solenoid valve
M1/M2----------Motor
