Patriot Gravity Tender V1.0, Руководство оператора

Страница: 8 / 63

Machine Inspection
After delivery of your new machine and/or completion of assembly, and before each use, inspection of the machine is mandatory.
This inspection should include, but not be limited to:
1. Check to see that all guards are in place, secured and functional.
2. That all fasteners are tight.
3. That all Hydraulic lines are free from leaks and defects.
4. That all electronics are working properly and wires are in good condition.
5. Check to see that all unnecessary personnel are out of the work area.
6. Inspect tires, if equipped, for the correct air pressure.
Lighting and Marking
It is the responsibility of the customer to know the lighting and marking requirements of the local highway authorities and to
install and maintain the equipment to provide compliance with the regulations. Add extra lights when transporting at night or
during periods of limited visibility if necessary.
Serial Number
To ensure efficient and prompt service, please furnish us with the model and serial number of the machine in all correspondence
or other contact. The serial number is located on a visible location of the machine.
Safety Decals
1. Keep safety decals clear and legible at all times.
2. Replace decals and signs that are missing or have become unreadable.
3. Safety signs are available from your Dealer or the Manufacturer.
How to install Safety Decals
1. Be sure that the installation area is clean and dry.
2. Decide on the exact position before you remove the backing paper.
3. Align the decal over the specified area and carefully press the small portion with the exposed sticky backing in place.
4. Slowly peal back the remaining paper and carefully smooth the remaining portion of the decal in place.
5. Small air pockets can be pierced with a pin and smoothed out using a piece of decal backing paper.
Gravity Tender V1.0 8