75
EN
Translation of original owner's manual
6. OPERATION
Horizontal cut:
• In order to get the best cutting results, slightly tilt the blade (5÷10°) towards the
cutting direction.
Cut slowly, especially with thick hedges.
Always follow the safety precautions.
The hedge-trimmer must only be used to trim hedges or small bushes. It
is forbidden to cut other types of material. Do not use the hedge-trimmer
as a lever to lift, move or break objects, nor lock it on fixed supports. It is
forbidden to apply tools or applications that are not the ones indicated by
the manufacturer onto the hedge-trimmer’s power take-off. Do not use it for
pruning trees or cutting grass.
• Use only as much throttle as is needed to do the job. Excessive engine speed
is unnecessary.
• Avoid cutting thick branches, for which will damage the blades and shorten the
life of drive systems.
• Tilting the trimmer 5 to 10° to the cutting object will make the job easy and
bring a good result.
• When a new machine is first operated, in the first few minutes grease may
come out of the gear case. But, since this is excess grease, there is no cause
for alarm. Just wipe it off with the engine stopped for next use.
• Always remember that the TIP of the line does cutting. You will achieve better
results by not crowding the line into the cutting area. Allow the unit to trim at its
own pace.
Содержание 620
Страница 86: ......
Страница 87: ......
Страница 88: ...Mountfield a s Miro ovick 697 251 64 Mnichovice Czech Republic...