10
OPERATING INSTRUCTIONS
1
Reverse
Switch
A
B
C
D
E
F
LED
Indicator
2
1. Using a ceiling fan will allow you to raise your
thermostat setting in summer and lower your thermostat
setting in winter without feeling a difference in your
comfort.
In warmer weather,
push the reverse switch left which
will result in downward airflow creating a wind chill effect.
In cooler weather,
push the reverse switch right, which
will result in upward airflow that can help move stagnant,
hot air off the ceiling area.
IMPORTANT:
Wait for the fan to stop before moving the
reverse switch. The reverse switch must be set either
completely left or right in order for the fan to function
correctly. If the reverse switch is set in the middle
position, the fan will not operate.
2. To operate the fan using remote control, press and
release the following buttons:
A - High fan speed
B - Medium fan speed
C - Low fan speed
D - Turns the fan off. Press and hold this button for 5
seconds to enter Light Delay Off mode, which will turn
off light after one minute. The LED on the remote control
will flash four times to confirm mode setting.
E - Turns the light on and off. Press and hold this button
to dim or brighten the LED.
F -
D/CFL Switch:
Located inside the battery
compartment in remote transmitter should be set to “D” to
enable the dimming feature.
