Patriot Lighting E6956BZ Скачать руководство пользователя страница 9

Page 9 of 9

  To clean, turn off and wipe with a damp, non-abrasive cloth.

1) The light does not come on at all:

 2) The light comes on during the day.

     a)  Make sure the wall switch and circuit breaker are on.

     a)  Make sure 

the motion sensor does not be installed in a relatively dark location.

     b)  Make sure the wiring is correct.
     c)  Make sure the Daylight turn-on(photocell) is in effect. 
     d)  Make sure 

the motion sensor is aimed in the right direction to cover the desired area.

     e)  Make sure the outside air temperature is not close to the same as a person’s body heat.

If unable to fix any of the above issues,please consult a certified electrician.

FIVE-YEAR LIMITED WARRANTY: 

If, during normal use, this PATRIOT LIGHTING  lighting fixture breaks or fails due to a 

defect in material workmanship within five (5) years from the date of original purchase, simply bring this lighting fixture with the 
original sales receipt back to your nearest MENARDS  retail store. At its discretion, PARTIOT LIGHTING  agrees to have the 
product or any defective part(s) repaired or replaced with the same or similar PATRIOT LIGHTING product or part free of 
charge, within the stated warranty period, when returned by the original purchaser with original sales receipt. This warranty; (1) 
excludes expendable parts including but not limited to light bulbs; (2) does not cover damage that has resulted from abuse or 
misuse; and (3) does not cover any losses, labor, injuries to persons/property or costs. This warranty does give you specific 
legal rights and you may have other rights, which vary from state to state.

Questions, problems, missing parts?

Before returning to your retailer, call our customer service at 1-800-887-6326
Monday – Friday 9:00 a.m. – 5:00 p.m. CST  

CARE AND MAINTENANCE

TROUBLESHOOTING

R

R

R

R

FCC Statement

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to 
operate the equipment. 
 
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and 
(2) this device must accept any interference received, including  interference that may cause undesired operation.

 

Spare Parts List:

The following parts are available for re-order if damaged or missing. Call us toll-free at 1-800-887-6326

Assembly Kit
5569MM (1 SET) for 356-9243
5570MM (1 SET) for 356-9244

AA

BB

DD

CC

EE

Mounting Screw 
X2

Mounting Bracket Screw 

Fixture Mounting Screw

Mounting Strap 

Decorative cover

#8/32X1/2 in  

#6/32 X1/2 in

#10/24 X1/4 in

This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment 

 should be installed and operated with minimum distance 20cm between the radiator& your body. 

Содержание E6956BZ










Отзывы: