Page 6 of 9
USER GUIDE (CONTINUED)
8. Press Fig.4“ ” icon,
select “Functions”, you can
choose “Test”, “AUTO”, or
“Custom Setting” which have
been adjusted to edit your
settings.
9. Press Fig.8 “Change image”.And
touch “take photo” to take a
photo .
9.1 Click “ ” to grasp a
your desired view
9.2 Click “ ” to take a photo.
9.3. Adjust the photo to trim
the photo’s desired size.
Then click “ ” .
7. Select “Custom Settings” in Manual
override. Adjust the “Duration”
as
desired, the “4hr” is the default.The
light will turn to your setted high
level brightness for your setted
duaration,then turns to “AUTO”
mode. The setting will be avaliable
only at this night. Next night the
light will turn to “Clock time(End
Time”mode. Adjust the “Clock
Time”, the “9PM” is the default. The
light will turn to high level
brightness you set for the
pre-setted “Clock Time”, then turns
to “AUTO” mode at your
pre-setted time.
Note
: If your settings on the
“Manual override”mode forget
to save, the settings will be
performed for 2 minutes,then
the light will revert to phsical
switch’s control on the lamp.
Fig.7
Fig.9
Fig.9-1
Fig. 8