PATONA Powerstation Autarc 600, Руководство пользователя

Страница: 14 / 87

12
Use of the DC 12V and DC 12V 5525 outputs:
» The power station is compatible with devices that require a 12V direct current
(DC) supply.
1. Press the ON/OFF button for the DC output.
2. Connect a compatible 12V device to the port.
Using the headlamp/ floodlight:
1. Press the ON/OFF button for spotlight/floodlight to select the different modes.
first press switch on
second press brightness 50%
third press brightness 100%
fourth press switch off
double press SOS mode
5. Troubleshooting
If the Powerstation fails to charge and/or power devices, please check the follo-
wing points.
»
Make sure the correct ON/OFF button is turned on.
»
Make sure the AC/DC or USB power switches are turned on and check that the
corresponding LED is green.
»
Check the battery level. If it is below 3%, charge the power station.
»
Make sure that the power consumption of the connected device does not ex-
ceed the rated power of the respective port.
»
If an error code is displayed on the LED, check the error codes (next section).
»
Do not operate the power station outside the permissible temperatures.