Patlite LS7, Инструкция по эксплуатации

Страница: 18 / 28

1
Unlock the base.
2
Remove the base.
Rotate
The ‘stackable structure’ is a feature which allows the main signal light unit
and the outer cover to be separated with just a single touch.
(Previous signal lights require tools to disassemble, such as removing
screws.)
The 'stackable structure' makes maintainance and inspection easier.
Refer to the procedure below to remove the stackable parts.
To reinstall, follow the procedure in the reverse order.
The following example is for a model without a buzzer included.
The removal procedure is the same for the outer cover or the Option Parts.( “ Option Parts” (P.27))
The following illustrates the internal block diagram for the signal light. Use it as reference when wiring.
CAUTION
The signal light is equipped with a buzzer case instead of
a base for the models equipped with the buzzer.
. The lock may be stiff.
. When reinstalling, fully rotate the base until the triangle mark
and bar mark are aligned.
Hold the base and the mount, and rotate until the bar marks
are aligned.
. Do not twist the base too hard when removing it.
Pull the base in the upward direction to remove it.
Never disassemble or remove any parts outside the
stackable parts.
LED Circuit Buzzer Circuit Flashing Circuit
White Blue
Power
supply
Buzzer
control
circuit
Flashing circuit
DC24V
LS7
(Note) . The diagram illustrates flashing, Illuminating and specifications
for Buzzer equipped models.
Functions will vary upon product specifications.
. The diagram is only an example.
Signal Flow Legend
: Illuminated Amber LED
: Flashing Red LED
: Buzzer 1 Sounds
18
Tip
Tip
Tip
Buzzer 1 Buzzer 2 Power supply wire Power supply wire White LED Blue LED
Green
Amber Red
Green LED Amber LED Red LED Common flashing wire
14
Procedure for removing the stackable parts
Block Diagram
5
Stackable Tower Construction
4
What is a 'Stackable Structure'?