12
5. Tilt and rest the lower base assembly (lean it on the carton) and attach the wheels to the base
using the 10mm bolts nuts and washers provided on the wheels. Secure these tight. Fig #3
Check and tighten all the 10mm bolts on the base at this time.
6. Locate and sort the hardware for the Reflector, Post to Socket and Post to head. NOTE: Lock
washers will go on the post to head connection. Fig #4.
Fig #3
Fig #4
7. Return unit to upright and slide the bottom of the post over the socket assembly. Align the
holes in the post to the holes in the socket assembly. Fig #5
8. Attach the post to the socket using 4 of the 6mm screws and FLAT WASHERS only. Align and
start all 4 screws and tighten securely with #3 Philips. Fig #5
9. Slide the decorative cover, and the slip collar in place over the post as in Fig #6.
You need these 2 pieces in place before you attach the heater head
.
Fig #5
Fig #6
