pathway VIA PWVIA RM P12 Скачать руководство пользователя страница 82 | Manualshive

Страница: 82 / 100

background image

July 2021

75

PWVIA RM P12 Ethernet Switches - Manual

Once VLANs are enabled and the VLAN range is set from the Base Configuration menu, by default a port is set as Untagged
(Normal) with a VLAN ID# of 1, or the lowest ID# of the VLAN range.

Ports set as Untagged only transmit data packets in the VLAN specified by the ID# and are typically connected to end
equipment.

Ports set as Tagged do not require a VLAN ID#, and this option will not be shown. Tagged ports transmit all data packets
regardless of the packet’s VLAN ID. Tagged ports are typically connected to other switches.

Generally, a Tagged port on one switch should not be connected to an Untagged port on another switch.

VLAN ID

The VLAN ID option is shown only for ports set as

Untagged

.

Menu Item

Description

VLAN ID#

Sets the VLAN tag used by the port. Only data packets belonging to this VLAN ID will be
transmitted by the port.
Property is only shown for Untagged ports. Only VLAN ID#s within the range defined in the
VLAN Setup menu will be shown.

<Back>

Return to previous menu.

NOTE

: It is not currently possible to set a soft label for VLAN ID# from the front panel. To set a soft label for VLAN ID, use

Pathscape.

Art-Net HANDLER

This option is only shown for ports set as Untagged (Normal). This menu item is the same property as

Art-Net Trap and

Convert.

Menu Item

Description

Disabled (default)

Art-Net Trap and Convert is disabled. Art-Net data is routed as normal broadcast traffic to
all devices on the current VLAN

Trap to sACN

Art-Net data packets with broadcast address destinations are trapped and converted to
E1.31 sACN multicast packets, as the packets enter the port of the switch. The resulting
sACN packets may then be filtered using the IGMP settings. All other Art-Net broadcast
packets, such as ArtPoll, are discarded.

Trap to ssACN

Same as the above, only Art-Net data packets are converted to Pathway ssACN (Secure
sACN).

<Back>

Return to previous menu.

Depending on the amount of Art-Net data traffic, this operation could significantly improve bandwidth usage efficiency and
reduce the amount of unnecessary traffic seen by end devices.

«
...
80
81
82
83
84
...
»

Содержание VIA PWVIA RM P12





































































































Отзывы:

Нет отзывов

Похожие инструкции для VIA PWVIA RM P12

Бренд: CAME Страницы: 4

Бренд: Wattle Страницы: 6

Бренд: Baicells Страницы: 8

Ray 3 Plus Client

Бренд: Sun Microsystems Страницы: 6

Бренд: Observint Страницы: 117

Бренд: H3C Страницы: 77

Бренд: Ruckus Wireless Страницы: 56

Бренд: Renesas Страницы: 6

Бренд: Dialogic Страницы: 2

Бренд: Cypress Semiconductor Страницы: 11

ER3-100 (5K02-55)

Бренд: 8e6 Technologies Страницы: 74

Бренд: Abocom Страницы: 1

Бренд: RAIDAGE Страницы: 60

Бренд: Z3 Technology Страницы: 67

Бренд: NETGEAR Страницы: 142

Бренд: SafeHome Страницы: 24

EK-FC750 GTX Series

Бренд: ekwb Страницы: 2

Бренд: Supermicro Страницы: 131

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды