background image

January 2021

32

Pathport® QUATTRO - 63XX - Manual

DEVICE PROPERTIES

The following fields are shown in the Device Property Panel in Pathscape. Some are editable, while others are read-only.

NOTE: If all properties are read-only (grayed out and uneditable), make sure you are logged into the correct 
Security Domain.

PATHWAY SECURITY DOMAIN

DOMAIN NAME

The name of the Security Domain the device is currently assigned to.

BASIC PROPERTIES

IDENTIFY DEVICE

Checking this box causes device to commence identify behavior (flashing LCD backlight).

DEVICE NAME

A user-configured, soft label for the Gateway. If left blank (and by default) the device name displayed will be the device’s IP 
Address. Shown in the Device window and on Gateway front display.

DEVICE NOTES

A user-configured text description field, shown in the Device view.

FRONT PANEL LOCKOUT

Checking this will lock the local controls on the front panel of the device. Scrolling menus allow you to read properties, but 
changing properties is disallowed.

LCD BACKLIGHT

Checking this will enable the LCD backlight on the front panel of the device.

Содержание Pathport QUATTRO 63 Series







































































Отзывы: