Pathway connectivity solutions Pathport QUATTRO 63 Series, Руководство пользователя

Страница: 12 / 70

Pathport® QUATTRO - 63XX - Manual January 2021
5
REAR PANEL
Rear 5-pole terminal
strip connectors
DMX/RDM
PORT D
ETHERNET
DMX/RDM
PORT C
DMX/RDM
PORT B
DMX/RDM
PORT A
2.5 mm
24VDC
AUX INPUT
CC1
CLASS 2 POE
Contact closure/
expansion input
RJ45 Ethercon
network connection
Earth ground
terminal
Auxiliary 24VDC
power input (by others)
2.5mm
center positive
Model 6322 Shown
DMX PORTS
Depending on the model number ordered, the DMX ports are: 5-pin XLR, RJ45 etherCON connectors or terminal strip
connectors. The XLR and etherCON connectors are of the locking type.
Plug your DMX512-capable devices into these ports using the appropriate cables. To unplug XLR and etherCON connectors,
push in the tab labeled “PUSH” at the top of the connector to unlock, then pull out the connector.
RJ45 etherCON NETWORK CONNECTION
Plug the Pathport QUATTRO into the lighting network using an Ethernet cable here. The Link/Act LED will light up amber
when a link is established, and will flash when there is network activity. If the LED is off, there is no active link.
If using PoE, connect the QUATTRO to a PoE switch.
CCI (CONTACT CLOSURE INPUT)
There is a dry contact closure input on the rear panel. Shorting the two terminals will activate the associated function. The
Contact Closure can activate DMX Hold, RDM Pause, and more functions may be added in future firmware updates.
POWER CONNECTIONS
The QUATTRO can be powered via a Power-over-Ethernet (PoE) source, such as a VIA PoE Switch. The PoE source must
be connected to the Ethernet Port.
The QUATTRO may be powered via DC Power supply between 24-48 VDC, center positive, 2.5mm barrel connector. A screw
terminal is provided to connect the device to earth ground.