19
Inserting handle on the base
Insert the handle on the base as
shown in figure, then rotate handle
90° in clockwise to block it in
upright position. Make sure the
handle is strongly fixed. To remove
the handle from the base, rotate
the handle 90° in clockwise and
disconnect from the base.
Regulating water pressure
Move the ON/OFF button on the base
side to increase or decrease water
pressure.
How to use water jet
Ligthly bow on the sink and insert the
handle in oral cave, directing the jet
tip towards the teeth.
Push ON button on the base and ON/
OFF button on the handle. Rotate ring
on the handle to change the direction
of the water jet.
GB