Pass XP-27 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 12

Pass XP-27 Скачать руководство пользователя страница 10

10

Maintenance:

Leave it on or turn it off:

The product is designed to be left on all the time. The

exception to this might be a case where the preamp will not be used for an extended
time - in that case it can be turn off.

Cleaning:

The ﬁ nish can be damaged by harsh cleaners and abrasive cloths. We

ﬁ nd a damp soft cloth works best. You can also use a mild solution of windex or white
vinegar to remove stubborn stains.

Replacing the fuse:

The fuse should only be replace with the same type and size as

indicated on the rear. Audio Specialty FUSE: NOTE: The “Overload” and “Time Delay
characteristics” will differ slightly (due to the different metallurgy of the fuse elements)
between commercial grade and audio grade fuses. We can’t guarantee that
your audiophile grade fuse, won’t blow at a different in-rush current threshold, than
your stock commercial fuse. Use of other than approved fuses, may invalidate your
product warranty and result in product damage.

XP-27 Specs:

Gain options

56, 66, 76dB

RIAA response

plus/minus .1 dB 20-20 KHz

Distortion

< .005 % THD @ 1mV MC input

< .002 % THD @ 10mV MM input

Maximum Output

22 volts rms.

Output Impedance

150/150 ohms

Input Impedance

100pF - 750pF on any input

30 ohm - 47K ohm any input

Unweighted Noise

-93 dB ref. 10 mV (MM), -85 dB ref. 1 mV (MC)

Power consumption

50 watts

Dimensions, each chassis

17”W x 12”D x 4”H times two

Weight

45 lbs

How to replace the fuse:

«
...
8
9
10
11
12
»

Содержание XP-27













Отзывы:

Нет отзывов