manualshive.com logo in svg

Pass XP-15, Руководство пользователя

Поделиться
Скачать
Pass XP-15 Скачать руководство пользователя страница 10

10

XP-15 Owner’s Manual

1-3, 5-8 “off ”.  Give the XP-15 a couple minutes to settle in 
electronically and turn the power-amps back on.  Listen to the system 
critically for some time (10 minutes to an hour) using various musical 
selections that you are familiar with.

Now turn the volume down and the power amps off  again, set the 
loading switches to the next lowest resistive value (50 ohms).  Once 
again give the XP-15 a couple minutes to settle in, turn the power 
amps back on and listen to the same musical selections as before.  If  
your test selections sound better with the new loading you can be 
assured that the loading change was in the correct (lower resistance 
in this example) direction.

If  the change in loading resulted in a more pleasant presentation of  
your chosen musical selections, once again turn down the volume on 
the preamp and the power supply off.  Select the next lowest resistive 
loading (25 ohms) and listen to the same selections again. At some 
point you will find a value where the sound deteriorates, move back 
to the last value that sounded excellent.  Once this has done you have 
reached the optimal resistive loading.

If  going below 100 ohm resulted in degraded sound, then obviously 
the correct change would have been to have gone upward next 
highest level above 100 and repeat the listening.  I am sure you get 
the idea, its not complicated but it can be time consuming.  

The eight values available should cover any cartridge needs nicely.  
However should you wish to get very creative resistors can be 
selected in parallel for almost limitless experimentation.  Some 
examples of  additional loading values follow on page 12.   Should 
you wish any combination of  switches may be selected “ON”.  The 
resultant values will follow Ohm’s law for resistors in parallel.  Once 
again this shouldn’t be necessary, but it is available should you wish 
to calculate the myriad of  permutations possible.

Again I would like to stress that you are listening for a musical 
balance in the selections that you play.  Some loading selections will 
offer better bass but poor high-end resolution, some will have better 
high-end and definition but with a flat sound stage.  You are seeking 
an optimal balance of  correct spectral balance in conjunction with 
correct spatial information.  Finding the best compromise will take 
time.

Do not make the mistake of  setting the pre-amp so that it enhances 
one recording only, listen to a variety of  material and adjust 
accordingly.

Содержание XP-15


















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды