10
X0.2 Owner’s Manual
All figures obtained after 1 hour warmup, with regulated 120 VAC
power line. See manual notes about AC power line regulation.
Gain, Balanced
12 dB Bal in, Bal output
Gain, single-ended
12dB unbal in, unbal output
Freq. Response
-3 dB @ 2 Hz
-3 dB at @ 100 kHz
Distortion @ 1KHZ
< .1 % THD, typ .003% @ 2v
Maximum Output
20 volts rms bal out
7 volts rms unbal out
Output Impedance
200 ohms unbalanced
750 ohms balanced
Input Impedance
10K ohm unbalanced
20K ohm balanced
CMRR
typ. -80 dB, 20 - 20kHz
Crosstalk
typ. -90 dB, 20 - 20kHz
Output Noise floor
< -110 dBV, 20 - 20kHz
Extl amp turn on
12 volts DC 50 mA continuous
Power Consumption
35 watts
Dimensions
17” W x 3.5”H x 13 “D each
Shipping Weight
70 pounds in packing carton,
3 units
For more information please contact:
Pass Laboratories Inc.
P.O. Box 219,
24449 Foresthill Rd.,
Foresthill, CA 95631
Tel: 530.367.3690
Fax: 530.369.2193
www.passlabs.com
© 2006 Pass Laboratories Inc.
X0.2 Specifications
“Pass”, “
pass
”, “Pass Labs”, “Pass Laboratories”, Supersymmetery”,
“Aleph”, and “Zen” and are all registered trademarks of Pass
Laboratories, Inc., and all rights thereto are protected by law.